Cisco 300-075 Dumps

Exam: Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)

300-075 Premium VCE File
300-075.vce - Exam-Labs Verified - Instant Download
Get Latest & Verified 300-075 Exam Questions with 30-Days Free Updates
452 Questions & Answers
 $39.99

Free 300-075 Exam Questions in VCE Format
File Votes Size Last comment
2 14.84 MB  
1 17.31 MB  
Play Cisco 300-075 VCE files with Avanset VCE Simulator
 

Cisco 300-075 Exam Tutorial

Showing 1-20 of 161 Questions   (Page 1 out of 9)


Question No : 1

Which two statements about configuring mobile and remote access on Cisco TelePresence
Video Communication Server Expressway are true? (Choose two.)

A. The traversal server zone on Expressway-C must have a TLS verify subject name configured.
B. The traversal client zone and the traversal server zone Media encryption mode must be set to Force encrypted.
C. The traversal client zone and the traversal server zone Media encryption mode must be set to Auto.
D. The traversal client zone on Expressway-C Media encryption mode must be set to Auto.
E. The traversal client zone and the traversal server zone must be set to SIP TLS with TLS verify mode set to On.


Question No : 2

You want to perform Media Gateway Control Protocol gateway maintenance. For this
purpose, you disable Media Control Gateway Protocol gateway using the no mgcp
command. After you perform the maintenance, you want to enable the Media Control
Gateway Protocol gateway.
Which command should you use?

A. enable mgcp
B. mgcp
C. mgcp enable
D. mgcp yes
E. activate mgcp
F. mgcp active


Question No : 3

Refer to the exhibit.
Cisco 300-075 question 3
Which statement is true?

A. Endpoints can make calls to unknown IP addresses without the VCS querying any neighbors.
B. If the VCS receives a call to an unknown IP address, it queries its neighbors for the remote address and if permitted, it routes the call through the neighbor.
C. Endpoints that are registered directly to the VCS can call only an IP address of a system that is also registered directly to that VCS.
D. Dialing by IP address is not supported on VCS.


Question No : 4

Which two options are functionalities of subzones in a Cisco VCS deployment? (Choose
two.)

A. Resolve names outside of the direct control of the Cisco VCS that exist on the public Internet.
B. Connect to another Cisco VCS on the same side of the firewall to extend dialing capabilities.
C. Traverse a firewall from a protected network to a public or DMZ network.
D. Apply registration, authentication, and media encryption policies.
E. Manage bandwidth to restrict standard definition endpoints from using more than 2 Mb of bandwidth.


Question No : 5

Which three steps configure Cisco Unified Survivable Remote Site Telephony for SIP
phones?
(Choose three.)

A. Configure voice register pool.
B. Configure voice register global dn.
C. Configure an SRST reference.
D. Configure a phone NTP reference.
E. Configure the SIP registrar.
F. Configure telephony service.


Question No : 6

You need to verify if the Media Gateway Control Protocol gateway is enabled and active.
Which command should you use for this purpose?

A. show running-config
B. show fallback-mgcp
C. show gateway
D. show ccm-manager fallback-mgcp
E. show running-config gateway
F. show fallback-mgcp ccm-manager


Question No : 7

When a call is made from a video endpoint to a Cisco TelePresence EX90 that is
registered to a Cisco VCS Control, which portion of the destination URI is the is the first
match that is attempted?

A. the full URI, including the domain portion
B. the destination alias, without the domain portion
C. the E.164 number that is assigned to the Cisco TelePresence EX90
D. the directory number that is assigned to the Cisco TelePresence EX90


Question No : 8

Which component of Cisco Unified Communications Manager is responsible for sending
keepalive messages to the Service Advertisement Framework forwarder?

A. Call Control Discovery requesting service
B. Hosted DNs service
C. Service Advertisement Framework client control
D. Cisco Unified Communications Manager database
E. Service Advertisement Framework-enabled trunk
F. gatekeeper


Question No : 9

How many active gatekeepers can you define in a local zone?

A. 1
B. 2
C. 5
D. 10
E. 15
F. unlimited


Question No : 10

An engineer is performing an international multisite deployment and wants to create an
effective backup method to access TEHO destinations in case the call limit triggers. Which
technology provides this ability?

A. AAR
B. CFUR
C. LRG
D. SRST


Question No : 11

Company X wants to implement RSVP-based Call Admission Control and move away from
the current location-based configuration.
Where does the administrator go to create a default profile?

A. System > Call Manager > Clusterwide > Service Parameters > RSVP
B. System > Service Parameters > RSVP
C. System > Service Parameters > Call Manager > Clusterwide parameters > RSVP
D. on each MGCP gateway at all remote locations


Question No : 12

Which three options are overlapping parameters for roaming when a device is configured
for
Device Mobility? (Choose three.)

A. device pool
B. location
C. network locale
D. codec
E. MRGL
F. extension


Question No : 13

Which module is the minimum PVDM3 module needed to support video transcoding?

A. PVDM3-32
B. PVDM3-64
C. PVDM3-128
D. PVDM3-192


Question No : 14

Which statement about the host portion format in Cisco Unified Communications Manager
URI dialing is false?

A. The host portion cannot start or end with a hyphen.
B. The host portion is not case sensitive.
C. The host portion accepts characters a-z, A-Z, 0-9, hyphens, and periods.
D. The host portion can have two periods in a row.


Question No : 15

Which statement about the function of the "+" symbol in the E.164 format is true?

A. The "+" symbol represents the international country code.
B. The "+" symbol represents the international call prefix.
C. The "+" symbol matches the preceding element one or more times.
D. The "+" symbol matches the preceding element zero or one time.


Question No : 16

When implementing a Media Termination Point, what determines the number of sessions
that is supported on each DSP?

A. the codecs that are used in universal transcoding mode
B. the size of the cluster that is being designed
C. the number of full-duplex media streams
D. the Cisco Unified Communications Manager node setting


Question No : 17

An engineer is setting up a Cisco VCS Cluster with SIP endpoints only. While configuring
the Cisco VCS peers, which signaling protocol is used between peers to determine the best
route for calls?

A. SIP
B. H.323
C. SCCP
D. MGCP


Question No : 18

You have deployed a Cisco 2821 ISR to perform as an SRST voice gateway at a remote
site. During a network failure between the remote site and the central office, some of the
phones located at the remote site are unable to make phone calls. Which two options are
potential causes of the problem? (Choose two.)

A. The site has exceeded the number of SRST endpoints supported by the voice gateway.
B. The ccm-manager fallback command is configured incorrectly on the voice gateway.
C. Phones at the remote site are assigned to the incorrect device pool.
D. The ccm-manager fallback-mgcp command is configured incorrectly on the voice gateway.
E. The site has exceeded the number of simultaneous calls allowed in SRST mode.


Question No : 19

Company X has deployed a VCS Control with a local zone and a traversal client zone. To
facilitate external calls, VCS Expressway is deployed and traversal server zone is set up
there. Video endpoints inside Company X have registered, but are unable to receive calls
from outside endpoints. Which option could be the cause of this issue?

A. The traversal zone on the VCS Control does not have a search rule configured.
B. The access control list on the VCS Control must be updated with the IP for the external users.
C. When a traversal zone is set up on VCS Control only outbound calls are possible.
D. The local zone on the VCS Control does not have a search rule configured.


Question No : 20

When configuring intercluster URI dialing, an engineer gets the error message Local
cluster cannot connect to the ILS network. Which three reasons for this error are true?
(Choose three.)

A. The SIP route patterns have not been properly configured.
B. The Tomcat certificates do not match.
C. The Cisco Unified Resource Identifier service needs a restart.
D. The ILS authentication password does not match.
E. The cluster ID does not match.
F. One cluster is using TLS certificate, and the other is using Password.


Showing 1-20 of 161 Questions   (Page 1 out of 9)

300-075 Training Products

300-075 Premium File

  • 452 Questions & Answers
  • Instant Download
  • $39.99

300-075 Study Guide

  • 629 PDF pages
  • Instant Download
  • $24.99

Site Search:

Close

Close
SPECIAL OFFER: GET 10% OFF

Exam-Labs PREMIUM Files

Get 10% Discount on all Exam-Labs.com PREMIUM files!



Enter Your Email Address to Receive Your 10% Off Discount Code

A Confirmation Link will be sent to this email address to verify your login

We value your privacy.
We will not rent or sell your email address

Close
Download Free Demo of VCE
Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.


Simply submit your e-mail address below to get started with our interactive software demo of your free trial.


Enter Your Email Address

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.